Amp Battery Charger

BATTERY CHARGER 48V to 12V STEP DOWN DC-DC 10AMP / 120W, 48V-12V Battery Charger

BATTERY CHARGER 48V to 12V STEP DOWN DC-DC 10AMP / 120W, 48V-12V Battery Charger

BATTERY CHARGER 48V to 12V STEP DOWN DC-DC 10AMP / 120W, 48V-12V Battery Charger

48V 12V BATTERY CHARGER 10AMP. Charge a 12V Battery from a 48V Battery System.

SUPPLIED WITH FULL WIRING INSTRUCTIONS. TYPE: SWITCH MODE STEP DOWN BATTERY CHARGER. CHARGING CURRENT: 10 AMP (120W). PEAK OUTPUT CURRENT (Vin = 48V): > 18A (216W). INPUT VOLTAGE: 24V to 60V.

CONTROL INPUT VOLTAGE RANGE: 0V to 60V. CONTROL INPUT CURRENT (V control = 60V): 6mA. CONTROL INPUT VOLTAGE (CVIN): CHARGER ENABLED > 46V / CHARGER DISABLED. LOAD REGULATION (Vin = 48V, I out = 0.2A to 15A). LINE REGULATION (Vin = 40V to 60V, I out = 10A).

DIMENSIONS: 215 x 71 x 55mm. FIXING CENTRES: 199mm X 40mm (4 HOLE FIXING). The Battery Charger can be wired in 2 ways. Wired as a fully automatic Charger. The Brown Control Wire is wired directly to the +ve Connection of the 48V Cranking (Donor) Battery to switch the Charger on and off automatically.

In this case the Control Wire senses the 48V Cranking (Donor) Battery Voltage and switches the Charger on only when the 48V Cranking (Donor) Battery is being charged. The Unit automatically controls the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevents the 48V Cranking Battery (Donor Battery) from becoming flat / exhausted. Wired as a manually operated Charger. The Brown Control Wire is wired via a Switch to the +ve Connection of the 48V Cranking (Donor) Battery to switch the Charger on and off manually. In this case the Operator can control when the Battery Charger is switched on or off.

If left on, the Unit will automatically control the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevent the 48V Cranking Battery (Donor Battery) from becoming flat / exhausted. MODELS ALSO AVAILABLE: 20AMP / 30AMP / 40AMP / 50AMP / 60AMP / 70AMP / 80AMP. OEM AND TRADE ENQUIRIES WELCOME. The item "BATTERY CHARGER 48V to 12V STEP DOWN DC-DC 10AMP / 120W, 48V-12V Battery Charger" is in sale since Friday, May 31, 2013. This item is in the category "Vehicle Parts & Accessories\Other Vehicle Parts & Accs".

The seller is "pjb278" and is located in Wem,, Shropshire. This item can be shipped worldwide.
  • Brand: EUROGROUP
  • MPN: E1079
  • Manufacturer Part Number: E1079
  • Country/Region of Manufacture: United Kingdom

BATTERY CHARGER 48V to 12V STEP DOWN DC-DC 10AMP / 120W, 48V-12V Battery Charger